2008 Volvo V70 Owner's Manual - Page 53
2008 Volvo V70 Manual
Page 53 highlights
Pull a door handle to unlock and open the door or pull the tailgate opening control. The number of doors that are unlocked at the same time can be set in the vehicle's menu system, under Car settings Lock settings Keyless entry. See page 125 for a description of the menu system. NOTE If the PCC does not function normally (weak battery, etc.), the vehicle can be unlocked with the detachable key blade. See page 57. Locking the vehicle The doors and the tailgate can be locked by pressing the lock button in any of the outside door handles. NOTE On keyless drive vehicles, the gear selector must be in the Park ( P) position and the ignition must be switched off before the doors/tailgate can be locked. Keyless drive remote control and driver's seat/door mirror memory When you leave the vehicle with a PCC in your possession and lock any door, the position of the driver's seat will be stored in the seat's memory. The next time a door is opened by a person with the same PCC in his/her possession, the driver's seat and door mirrors will automatically move to the position that they were in when the door was most recently locked. NOTE If several people carrying PCCs approach the vehicle at the same time, the driver's seat and door mirrors will assume the positions they were in for the person who opens the driver's door. 62 02 Locks and alarm Keyless drive See also page 83 for information on adjusting and storing the seat's position in the seat memory. Keyless drive information messages If anyone leaves the vehicle with the only keyless drive remote control in his or her possession while the ignition is switched on, a message will be shown in the information display and an audible signal will sound. NOTE This message will only be displayed if the start control is in mode I or II. The message will be erased from the display and the audible signal will stop when the PCC has been returned to the vehicle and one of the following has occurred: A door has been opened and closed The PCC has been inserted in the ignition slot The READ button (see page 126 for the location of this button) has been pressed.