2003 Yamaha Motorsports Big Bear 400 4x4 Owners Manual - Page 28
2003 Yamaha Motorsports Big Bear 400 4x4 Manual
Page 28 highlights
EBU00053 EBU00607 Handlebar switches Start switch " " The starter motor cranks the engine when this switch is pushed. CAUTION: _ See starting instructions prior to starting the engine. (See page 6-1 for details.) _ EBU01058 1. Light switch " / /OFF" 2. Engine stop switch " "/" 3. Start switch " " " Light switch " / /OFF" Set the switch to the " " position to turn on the low beam and the tail/brake light. Set the switch to the " " position to turn on the high beam and the tail/brake light. Set the switch to the "OFF" position to turn off all the lights. EBU00849 Engine stop switch " "/" " Make sure that the engine stop switch is in the " " position. The engine stop switch controls ignition and can be used at all times to stop the engine, especially in an emergency. The engine will not start or run when the engine stop switch is turned to " ". 4-5 CAUTION: _ Do not use the headlights with the engine turned off for more than thirty minutes. The battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. _