2003 Yamaha Motorsports Kodiak 400 Automatic Owners Manual - Page 41
2003 Yamaha Motorsports Kodiak 400 Automatic Manual
Page 41 highlights
EBU01002 Auxiliary DC jack The auxiliary DC jack is located at the front right side of the ATV. The auxiliary DC jack can be used for suitable work lights, radios, etc. The auxiliary DC jack should only be used when the engine is running. 1. Set the light switch to "OFF". _ Maximum rated capacity for the auxiliary DC jack: DC 12 V, 120 W (10 A) 4. When the auxiliary DC jack is not being used, cover it with the cap. CAUTION: G G 1. Auxiliary DC jack cap G 2. Start the engine. (See pages 6-1-6-3.) 3. Open the auxiliary DC jack cap, and then insert the accessory power plug into the jack. 4-19 Do not use accessories requiring more than the above maximum capacity. This may overload the circuit and cause the fuse to blow. If accessories are used without the engine running or with the headlights turned on, the battery will lose its charge and engine starting may become difficult. Do not use an automotive cigarette lighter or other accessories with a plug that gets hot because the jack can be damaged. _