2004 Yamaha Motorsports Royal Star Venture Owners Manual - Page 20
2004 Yamaha Motorsports Royal Star Venture Manual
Page 20 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU11760 Speedometer unit 3 1. 2. 3. 4. Speedometer Odometer/tripmeter/clock "RESET" button "SELECT" button The speedometer unit is equipped with the following: G a digital speedometer (which shows riding speed) G an odometer (which shows the total distance traveled) G two tripmeters (which show the distance traveled since they were last set to zero) G a fuel reserve tripmeter (which shows the distance traveled on the fuel reserve) G a clock Odometer and tripmeter modes Pushing the "SELECT" button switches the display between the odometer mode "ODO" and the tripmeter modes "TRIP 1" and "TRIP 2" in the following order: ODO → TRIP 1 → TRIP 2 → ODO If the fuel level warning light comes on (see page 3-2), the odometer display will automatically change to the fuel reserve tripmeter mode "TRIP F" and start counting the distance traveled from that point. In that case, pushing the "SELECT" button switches the display between the various tripmeter and odometer modes in the following order: TRIP F → TRIP 1 → TRIP 2 → ODO → TRIP F To reset a tripmeter, select it by pushing the "SELECT" button, and then push the "RESET" button. If you do not reset the fuel reserve tripmeter manually, it will reset itself automatically and the display will return to "TRIP 1" after refueling and traveling 5 km (3 mi). NOTE: After resetting the fuel reserve tripmeter, the display will return to "TRIP 1", unless a different mode had been previously selected; in that case, the display automatically returns to the prior mode. Clock mode To change the display to the clock mode, push both the "SELECT" and "RESET" buttons. To change the display back to the odometer modes, push the "SELECT" button. To set the clock: 1. Push both the "SELECT" and "RESET" buttons for at least two seconds. 2. When the hour digits start flashing, push the "RESET" button to set the hours. 3. Push the "SELECT" button, and the minute digits will start flashing. 4. Push the "RESET" button to set the minutes. 3-4