2005 Yamaha Motorsports RS Vector Owners Manual - Page 80
2005 Yamaha Motorsports RS Vector Manual
Page 80 highlights
ESU04271 Anti-bottoming stopper adjustment For RS90/RS90R The spring force can be adjusted by changing the installation location of the anti-bottoming stoppers. WARNING @ Be sure to have a Yamaha dealer make this adjustment. @ CD-24E Installation location Spring force Standard S Soft M Medium M H Hard NOTE: @ Be sure to make this adjustment when there is no load (rider or cargo) on the snowmobile. @ 1. Loosen the anti-bottoming stopper nut 1 while holding the anti-bottoming stopper bolt 2 securely with a wrench so it does not move, and then remove the nut, bolt, and anti-bottoming stopper 3. CAUTION: @ Never allow the bolt to move while loosening or tightening the nut. @ 2. Install the anti-bottoming stopper in the desired location. 3. Tighten the nut while holding the bolt securely. Anti-bottoming stopper nut tightening torque: 60 Nm (6.0 m·kgf, 43 ft·lb) CAUTION: @ Make sure that the anti-bottoming stoppers are installed in the same location on both sides. @ 8-28