2005 Yamaha Motorsports Road Star Owners Manual - Page 32
2005 Yamaha Motorsports Road Star Manual
Page 32 highlights
INSTRUMENT AND CONTROL FUNCTIONS To change the windshield height 1. Remove the bolts on each side of the windshield. 2. Move the windshield to the other position. 3. Install the bolts and tighten them to the specified torque. 3 Tightening torque: Windshield bolt: 16 Nm (1.6 m·kgf, 12 ft·lbf) EWA10920 EAU14613 WARNING After adjusting the windshield: G Securely tighten the windshield bolts. G Turn the handlebar to the left and right to make sure that the handlebar is not obstructed and that the windshield does not contact any other parts. G Open the throttle and make sure that the throttle grip returns properly when released, otherwise an accident or injury could result. Saddlebags [XV17AT(C)] EWA11111 WARNING Improper loading or overloading can cause loss of control and possibly an accident or personal injury. See pages 1-5 and 6-17 for important loading and tire pressure information. G Always securely close each saddlebag before riding. G Distribute weight evenly on each side of the motorcycle. G Do not exceed the load limit of 5 kg (11 lb) for each saddlebag. G Do not exceed the maximum load of XV17AT(C) 179 kg (395 lb) for the vehicle. G Do not exceed 120 km/h (80 mi/h) when riding with luggage in the sidecases, otherwise handling could be affected. Improper loading, poor tire or overall motorcycle conditions, poor road surfaces or adverse weather conditions may make it necessary to further reduce the riding speed. 4. Loosen the screws holding the windshield cover located above the headlight, position the cover close to the headlight without touching it, and then tighten the screws. 1. Windshield cover 2. Screw 3-12