2005 Yamaha Motorsports V Star Silverado Owners Manual - Page 41
2005 Yamaha Motorsports V Star Silverado Manual
Page 41 highlights
OPERATION AND IMPORTANT RIDING POINTS EAU16671 Shifting XVS650 Shifting gears lets you control the amount of engine power available for starting off, accelerating, climbing hills, etc. The gear positions are shown in the illustration. NOTE: To shift the transmission into the neutral position, press the shift pedal down repeatedly until it reaches the end of its travel, and then slightly raise it. and drive train, which are not designed to withstand the shock of forced shifting. EAU16680 1. Shift pedal 2. Neutral position ECA10260 CAUTION: G XVS650A/AT 1. Shift pedal 2. Neutral position G Even with the transmission in the neutral position, do not coast for long periods of time with the engine off, and do not tow the motorcycle for long distances. The transmission is properly lubricated only when the engine is running. Inadequate lubrication may damage the transmission. Always use the clutch while changing gears to avoid damaging the engine, transmission, To start out and accelerate 1. Pull the clutch lever to disengage the clutch. 2. Shift the transmission into first gear. The neutral indicator light should go out. 3. Open the throttle gradually, and at the same time, release the clutch lever slowly. 4. At the recommended shift points shown in the following table, close the throttle, and at the same time, quickly pull the clutch lever in. 5. Shift the transmission into second gear. (Make sure not to shift the transmission into the neutral position.) 6. Open the throttle part way and gradually release the clutch lever. 7. Follow the same procedure when shifting to the next higher gear. 5 5-3