2005 Yamaha Motorsports Vino 125 Owners Manual - Page 51

2005 Yamaha Motorsports Vino 125 Manual

Get 2005 Yamaha Motorsports Vino 125 PDF manuals and user guides View all 2005 Yamaha Motorsports Vino 125 manuals

Page 51 highlights

PERIODIC MAINTENANCE AND MINOR REPAIR EWA10790 EAU20060 w 1 2 Headlight bulbs get very hot. Therefore, keep flammable products away from a lit headlight bulb, and do not touch the bulb until it has cooled down. 4. Place a new headlight bulb into position, and then secure it with the bulb holder. ECA10660 Final transmission oil The final transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the scooter. In addition, the final transmission oil must be changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Start the engine, warm it up by riding the scooter for several minutes, and then stop the engine. 2. Place the scooter on the centerstand. 3. Place an oil pan under the final transmission case to collect the used oil. 1 2 3 4 5 6 7 8 9 ZAUM00** 1. Headlight coupler 2. Bulb cover cC Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 6-17 2. Disconnect the headlight coupler, and then remove the bulb cover. 1 1 ZAUM00** 1. Bulb holder 3. Remove the headlight bulb holder by turning it counterclockwise, and then remove the defective bulb. ZAUM00** 1. Final transmission oil filler cap

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
6-17
1
2
3
4
5
6
7
8
9
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU20060
Final transmission oil
The final transmission case must be
checked for oil leakage before each ride.
If any leakage is found, have a Yamaha
dealer check and repair the scooter. In
addition, the final transmission oil must
be changed as follows at the intervals
specified in the periodic maintenance
and lubrication chart.
1. Start the engine, warm it up by
riding the scooter for several min-
utes, and then stop the engine.
2. Place the scooter on the
centerstand.
3. Place an oil pan under the final
transmission case to collect the
used oil.
1
ZAUM00**
1.
Final transmission oil filler cap
2
1
ZAUM00**
1.
Headlight coupler
2.
Bulb cover
2.
Disconnect the headlight coupler,
and then remove the bulb cover.
1
ZAUM00**
1.
Bulb holder
3.
Remove the headlight bulb holder
by turning it counterclockwise, and
then remove the defective bulb.
EWA10790
w
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4.
Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
ECA10660
c
C
Do not touch the glass part of the
headlight bulb to keep it free from oil,
otherwise the transparency of the
glass, the luminosity of the bulb, and
the bulb life will be adversely affected.
Thoroughly clean off any dirt and fin-
gerprints on the headlight bulb us-
ing a cloth moistened with alcohol
or thinner.
5.
Install the headlight bulb cover, and
then connect the coupler.
6.
Install the headlight unit by install-
ing the screws.
7.
Have a Yamaha dealer adjust the
headlight beam if necessary.