2006 Yamaha Motorsports Apex Owners Manual - Page 59
2006 Yamaha Motorsports Apex Manual
Page 59 highlights
Left and right side covers To remove a side cover Turn the fasteners counterclockwise, and then remove the side cover. 1 Fastener 2 Right side cover 3 Left side cover To install a side cover Place the side cover in its original position, and then turn the fasteners clockwise. NOTE: @ Be sure to fit the projection on the rear of the side cover into the hole in the lower side cover. @ Top cover To remove the top cover 1. Remove the screws, and then remove the cable guide. 2. Remove the bolts, disconnect the main switch coupler and auxiliary DC jack coupler, and then remove the top cover. 1 2 3 4 Screws Cable guide Bolts Top cover To install the top cover 1. Connect the main switch coupler and auxiliary DC jack coupler, place the top cover in its original position, and then install the bolts. 2. Pass all of the cables, etc., through the cable guide, place the cable guide in its original position, and then install the screws. 8-6