2006 Yamaha Motorsports RS Vector ER Owners Manual - Page 90
2006 Yamaha Motorsports RS Vector ER Manual
Page 90 highlights
1. Lift up the shroud. 2. Remove the right side cover 1. 3. Unhook the latch 2. 4. Loosen the clamp screws 3. 5. Slide the oil tank breather hose clamp 4 away from the air filter case, and then disconnect the oil tank breather hose 5. 6. Slide the crankcase breather hose clamp 6 up, and then disconnect the crankcase breather hose 7 from the engine. 7. Lift up the air filter case, slide the crankcase breather hose clamp 8 down, disconnect the crankcase breather hose from the air filter case, and then remove the air filter case. 8. Disconnect the negative battery lead. 9. Replace the blown fuse with one of the proper amperage. 10. Connect the negative battery lead. 11. Install the air filter case by reversing the removal steps. NOTE: @ When installing the air filter case, connect the crankcase breather hose to the air filter case first, and then connect it to the engine. @ CAUTION: @ Be sure to connect the breather hoses securely when installing the air filter case. @ NOTE: @ If the fuse immediately blows again, ask a Yamaha dealer to inspect the snowmobile. @ 8-36