2006 Yamaha Motorsports Road Star Midnight Silverado Owners Manual - Page 74
2006 Yamaha Motorsports Road Star Midnight Silverado Manual
Page 74 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU23070 To adjust the drive belt slack 1. Loosen the rear wheel axle nut and the brake caliper bracket bolt. 3. To tighten the drive belt, turn the adjusting bolt on each side of the swingarm in direction (a). To loosen the drive belt, turn the adjusting bolt on each side of the swingarm in direction (b), and then push the rear wheel forward. NOTE: Turn each adjusting bolt the same amount for proper wheel alignment. ECA10880 CAUTION: Improper drive belt slack will overload the engine. Keep the drive belt slack within the specified range. 5. Tighten the axle nut and the brake caliper bracket bolt to the specified torques. Tightening torques: Axle nut: 150 Nm (15.0 m·kgf, 110 ft·lbf) Brake caliper bracket bolt: 48 Nm (4.8 m·kgf, 35 ft·lbf) 1. Axle nut 6 1. Drive belt slack adjusting bolt 2. Locknut 3. Wheel axle 1. Brake caliper bracket bolt 4. Tighten the locknuts. 2. Loosen the drive belt puller locknut on each side of the swingarm. 6-28