2006 Yamaha Motorsports Virago 250 Owners Manual - Page 20
2006 Yamaha Motorsports Virago 250 Manual
Page 20 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU12410 ECA10050 EAU12820 Dimmer switch "LIGHTS" Set the switch to "HI" for the high beam and to "LO" for the low beam. EAU12440 CAUTION: See page 5-1 for starting instructions prior to starting the engine. Clutch lever 3 Turn signal switch "TURN" To signal a right-hand turn, push this switch to the right. To signal a left-hand turn, push this switch to the left. When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position. EAU12510 1. Clutch lever Horn switch "HORN" Press this switch to sound the horn. EAU12650 Engine stop switch "ENGINE STOP" Set this switch to "RUN" before starting the engine. Set this switch to "OFF" to stop the engine in case of an emergency, such as when the vehicle overturns or when the throttle cable is stuck. EAU12690 The clutch lever is located at the left handlebar grip. To disengage the clutch, pull the lever toward the handlebar grip. To engage the clutch, release the lever. The lever should be pulled rapidly and released slowly for smooth clutch operation. The clutch lever is equipped with a clutch switch, which is part of the ignition circuit cut-off system. (See page 3-11.) Start switch "START" Push this switch to crank the engine with the starter. 3-3