2007 Yamaha Motorsports Attak GT Owners Manual - Page 90
2007 Yamaha Motorsports Attak GT Manual
Page 90 highlights
2. Remove the shroud and the right side cover. (See pages 8-5-8-7 for removal procedures.) 3. Remove the red (+) connecting lead from the lead holder and move it away from the black (-) connecting lead. 5. Connect the other end of the red (+) jumper cable to the positive (+) terminal of the booster battery. 6. Connect the black (-) jumper cable to the negative (-) terminal of the booster battery. 7. Pull the black (-) connecting lead cover to expose the terminal through the slit in the cover, and then connect the black (-) jumper cable to the black (-) connecting lead. CAUTION: @ Be sure to connect the red (+) jumper cable to the red (+) connecting lead and the black (-) jumper cable to the black (-) connecting lead. Do not reverse the connections. @ 4. Pull the red (+) connecting lead cover to expose the terminal through the slit in the cover, and then connect the red (+) jumper cable to the red (+) connecting lead. 9-2