2007 Yamaha Motorsports Grizzly 350 4x4 Owners Manual - Page 102
2007 Yamaha Motorsports Grizzly 350 4x4 Manual
Page 102 highlights
EBU23381 Final gear oil The final gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the ATV. In addition, the final gear oil level must be checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the final gear oil level 1. Place the ATV on a level surface. NOTE: The final gear oil level must be checked on a cold engine. 8 2. Remove the final gear oil filler bolt, and then check the oil level in the final gear case. NOTE: The oil level should be at the brim of the filler hole. 1. Final gear oil 2. Final gear oil filler bolt 3. Correct oil level 3. If the oil is below the brim of the filler hole, add sufficient oil of the recommended type to raise it to the correct level. 4. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 8-16