2007 Yamaha Motorsports Grizzly 350 Owners Manual - Page 117
2007 Yamaha Motorsports Grizzly 350 Manual
Page 117 highlights
WHAT CAN HAPPEN You could lose braking ability, which could lead to an accident. HOW TO AVOID THE HAZARD After servicing: G Make sure the brakes operate smoothly and that the free play is correct. G Make sure the brakes do not drag. Replacement of brake components requires professional knowledge. These procedures should be performed by a Yamaha dealer. 1. Locknut 2. Brake lever free play adjusting bolt EBU24751 Brake light switches The operation of the brake light switches must be checked and, if necessary, adjusted at the intervals specified in the periodic maintenance and lubrication chart. The brake light switch for the brake pedal can be adjusted as follows, but the other brake light switches should be adjusted by a Yamaha dealer. 1. Remove panel A. (See page 8-8.) NOTE: The brake light switch is properly adjusted when the brake light comes on just before braking takes effect. 8-31 4. Tighten the locknut at the brake lever. NOTE: When adjusting the rear brake lever free play: G Be sure not to step on the brake pedal. G Make sure the brake pedal does not move. EWB02020 8 WARNING POTENTIAL HAZARD Operating with improperly serviced or adjusted brakes.
![](/manual_guide/autos/2007-yamaha-motorsports-grizzly-350-owners-manual-1a8e790/117.png)