2007 Yamaha Motorsports Majesty Owners Manual - Page 66
2007 Yamaha Motorsports Majesty Manual
Page 66 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR EAU21992 1 2 3 4 5 6 7 8 9 Front tire: Size: 120/80-14M/C 58S Manufacturer/model: IRC/MB67 DUNLOP/D305FL Rear tire: Size: 150/70-13M/C 64S Manufacturer/model: IRC/MB67 DUNLOP/D305L EWA10580 Cast wheels To maximize the performance, durability, and safe operation of your vehicle, note the following points regarding the specified wheels. G The wheel rims should be checked for cracks, bends, warpage or damage before each ride. If any damage is found, have a Yamaha dealer replace the wheel. Do not attempt even the smallest repair to the wheel. A deformed or cracked wheel must be replaced. G The wheel should be balanced whenever either the tire or wheel has been changed or replaced. An unbalanced wheel can result in poor performance, adverse handling characteristics, and a shortened tire life. G Ride at moderate speeds after changing a tire since the tire surface must first be "broken in" for it to develop its optimal characteristics. G After repairing or replacing the rear tire, tighten the valve stem nut and locknut to the specified torques. 6-25 1 2 1. Valve stem nut 2. Valve stem locknut G G WARNING It is dangerous to ride with a worn-out tire. When a tire tread begins to show crosswise lines, have a Yamaha dealer replace the tire immediately. The replacement of all wheeland brake-related parts, including the tires, should be left to a Yamaha dealer, who has the necessary professional knowledge and experience. Tightening torques: Valve stem nut: 1.5 Nm (0.2 m·kgf, 1.1 ft·lbf) Valve stem locknut: 3.0 Nm (0.3 m·kgf, 2.2 ft·lbf)