2007 Yamaha Motorsports Nytro ER Owners Manual - Page 65
2007 Yamaha Motorsports Nytro ER Manual
Page 65 highlights
E_8gg.book Page 10 Thursday, March 16, 2006 4:23 PM 7. Remove the oil filter cartridge 9 with an oil filter wrench. NOTE: @ An oil filter wrench is available at a Yamaha dealer. @ 8. Apply a thin coat of engine oil to the O-ring of the new oil filter cartridge. 9. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lb) 10. Install the engine oil drain bolts, and then tighten them to the specified torques. Tightening torques: Crankcase engine oil drain bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lb) Oil tank engine oil drain bolt: 16 Nm (1.6 m·kgf, 11 ft·lb) 11. Add 2.0 L (1.8 Imp qt, 2.1 US qt) of the recommended engine oil to the oil tank, and then install and tighten the oil level gauge/dipstick and the cylinder head cap. Recommended engine oil: See page 6-2. Oil quantity: With oil filter cartridge replacement: 3.0 L (2.6 Imp qt, 3.2 US qt) Without oil filter cartridge replacement: 2.8 L (2.5 Imp qt, 3.0 US qt) Total amount: 3.7 L (3.3 Imp qt, 3.9 US qt) 12. Start the engine, warm it up for several minutes, and then turn it off. 8-10