2007 Yamaha Motorsports Phazer FX Owners Manual - Page 28
2007 Yamaha Motorsports Phazer FX Manual
Page 28 highlights
WARNING @ G G G If the self-diagnosis warning indicator and warning light flash continuously, and an error code is displayed during operation, there may be some problem with the electrical circuit, lead couplers, etc. Stop the engine and allow it to cool off. Then, check that the wire harness couplers in the engine compartment are connected properly. If the self-diagnosis warning indicator, warning light, and an error code flash after the engine has been restarted, note the error code, and then have a Yamaha dealer inspect the snowmobile as soon as possible. @ ESU00031 Engine stop switch The engine stop switch 1 is used to stop the engine in an emergency. Simply push 2 the stop switch to stop the engine. To start the engine, pull 3 the stop switch and proceed with starting the engine. (See page 7-1 for more details.) During the first few rides, practice using the stop switch so that you can react quickly in an emergency. ESU05440 Drive select switch The drive select switch 1 is used to shift the snowmobile into drive or reverse. After coming to a complete stop, press the drive select switch. The drive "D" indicator light 2 comes on when the transmission is in drive (forward). The reverse "R" indicator light 3 comes on when the transmission is in reverse. CAUTION: @ Do not shift from drive to reverse or from reverse to drive while the snowmobile is moving. Otherwise, the drive system could be damaged. @ 5-9