2007 Yamaha Motorsports Royal Star Venture Owners Manual - Page 83
2007 Yamaha Motorsports Royal Star Venture Manual
Page 83 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR 2. Remove the oil filler bolt and drain bolt to drain the oil from the final gear case. 3. Install the final gear oil drain bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil drain bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) 6. Check the final gear case for oil leakage. If oil is leaking, check for the cause. EAU20070 Coolant The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. EAU20212 4. Add the recommended final gear oil to the brim of the filler hole. Recommended final gear oil: SAE80 API GL-4 Hypoid gear oil Oil quantity: 0.20 L (0.21 US qt) (0.18 Imp.qt) To check the coolant level 1. Place the vehicle on a level surface and hold it in an upright position. 2. Remove panel A. (See page 7-8.) NOTE: G The coolant level must be checked on a cold engine since the level varies with engine temperature. G Make sure that the vehicle is positioned straight up when checking the coolant level. A slight tilt to the side can result in a false reading. 3. Check the coolant level in the coolant reservoir. NOTE: The coolant should be between the minimum and maximum level marks. 7-16 7 NOTE: GL4 is a quality rating. Hypoid gear oils rated GL5 or GL6 may also be used. 5. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf)