2007 Yamaha Motorsports V Star 650 Custom Owners Manual - Page 55
2007 Yamaha Motorsports V Star 650 Custom Manual
Page 55 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 9. Add the specified amount of the recommended oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 8-1. Oil quantity: Without oil filter element replacement: 2.60 L (2.75 US qt) (2.29 Imp.qt) With oil filter element replacement: 2.80 L (2.96 US qt) (2.46 Imp.qt) ECA11620 1. Outer oil filter element cover 2. Bolt 1. Oil filter element 2. O-ring 6. Install a new oil filter element and the O-ring. 7. Install the oil filter element covers by installing the bolts, and then tighten them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7 ft·lbf) 1. Inner oil filter element cover 2. Bolt 6 CAUTION: G 5. Remove the oil filter element and O-ring. 8. Install the engine oil drain bolt, and then tighten it to the specified torque. NOTE: Check the washer for damage and replace it if necessary. 6-12 In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a higher quality than specified. In addition, do not use oils labeled "ENERGY CONSERVING II" or higher.