2008 Yamaha Motorsports Apex M-TX SE Owners Manual - Page 36
2008 Yamaha Motorsports Apex M-TX SE Manual
Page 36 highlights
Control functions 3. Tighten the locknut while holding the control rod adjusting nut in place. Locknut tightening torque: 25 Nm (2.5 m·kgf, 18 ft·lb) ECS00310 CAUTION: • When using the two wrenches included in the owner's tool kit, make sure that they are situated at a right angle to the control rod as shown, and that they are tightly fitted to the locknut and the control rod adjusting nut. • The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. 30
![](/manual_guide/autos/2008-yamaha-motorsports-apex-mtx-se-owners-manual-1431161/36.png)
Control functions
3.
Tighten the locknut while holding the
con-
trol rod adjusting nut in place.
Locknut tightening torque:
25 Nm (2.5 m·kgf, 18 ft·lb)
ECS00310
CAUTION:
•
When using the two wrenches included
in the owner’s tool kit, make sure that
they are situated at a right angle to the
control rod as shown, and that they are
tightly fitted to the locknut and the
con-
trol rod adjusting nut.
•
The left and right adjusting nuts must be
set to the same position. Uneven set-
tings can cause poor handling and loss
of stability.
30