2008 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 21
2008 Yamaha Motorsports Grizzly 125 Automatic Manual
Page 21 highlights
EBU18090 Start switch "START" Push this switch to crank the engine with the starter. ECB00050 CAUTION: See the starting instructions on page 6-1 prior to starting the engine. EBU18140 tle lever will increase the engine speed. Regulate the speed of the ATV by varying the throttle position. Because the throttle is springloaded, the ATV will decelerate, and the engine will return to an idle any time the hand is removed from the throttle lever. 1 2 3 4 Light switch "LIGHTS" Set this switch to "LO" to turn on the low beams and the taillight. Set the switch to "HI" to turn on the high beams and the taillight. Set the switch to "OFF" to turn off all the lights. ECB00040 5 6 7 1 1. Throttle lever CAUTION: Do not use the headlights with the engine turned off for an extended period of time, otherwise the battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. EBU18270 8 9 10 11 Before starting the engine, check the throttle to be sure it is operating smoothly. Make sure it returns to the idle position as soon as the lever is released. Throttle lever Once the engine is running, movement of the throt4-3