2008 Yamaha Motorsports Grizzly 350 4x4 Owners Manual - Page 23
2008 Yamaha Motorsports Grizzly 350 4x4 Manual
Page 23 highlights
ECB00040 CAUTION: Do not use the headlights with the engine turned off for an extended period of time, otherwise the battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and recharge it. EBU28380 4 On-Command four-wheel-drive switch "2WD"/"4WD" This ATV is equipped with a switch to change from two-wheel drive to four-wheel drive and vice-versa. Select the appropriate drive according to the terrain and the conditions. G "2WD" (two-wheel drive): Power is supplied to the rear wheels. G "4WD" (four-wheel drive): Power is supplied to the rear and front wheels. To change from two-wheel drive to four-wheel drive, stop the ATV and push the switch in to the "4WD" position. The four-wheel-drive indicator light " " comes on. To change from four-wheel drive to two-wheel drive, stop the ATV and push the switch in to the "2WD" position. 4-4 1. On-Command four-wheel-drive switch "2WD"/"4WD"
![](/manual_guide/autos/2008-yamaha-motorsports-grizzly-350-4x4-owners-manual-a4e8bb6/23.png)