2008 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 151
2008 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 151 highlights
7. Install the bulb holder cover and the cover at the rear of the headlight. ECB00670 CAUTION: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. 8. Adjust the headlight beam if necessary. EBU25550 Adjusting a headlight beam ECB00690 1. Headlight beam adjusting screw EBU25620 CAUTION: It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). Replacing the tail/brake light bulb If the tail/brake light bulb burns out, replace it as follows. 1. Remove the tail/brake light assembly by removing the nuts together with the washers. 8 8-56
![](/manual_guide/autos/2008-yamaha-motorsports-grizzly-450-4x4-owners-manual-db0e7e7/151.png)
8-56
8
7.
Install the bulb holder cover and the cover at
the rear of the headlight.
CAUTION:
ECB00670
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
8.
Adjust the headlight beam if necessary.
EBU25550
Adjusting a headlight beam
CAUTION:
ECB00690
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the adjusting
screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
EBU25620
Replacing the tail/brake light bulb
If the tail/brake light bulb burns out, replace it as
follows.
1. Remove the tail/brake light assembly by re-
moving the nuts together with the washers.
1.
Headlight beam adjusting screw