2008 Yamaha Motorsports Grizzly 700 4x4 EPS Owners Manual - Page 120

2008 Yamaha Motorsports Grizzly 700 4x4 EPS Manual

Get 2008 Yamaha Motorsports Grizzly 700 4x4 EPS PDF manuals and user guides View all 2008 Yamaha Motorsports Grizzly 700 4x4 EPS manuals

Page 120 highlights

2. Remove the final gear oil level check bolt, and then check the oil level in the final gear case. NOTE: The oil level should be at the brim of the check hole. 1. Final gear oil filler bolt 4. Install the oil level check bolt and oil filler bolt, and then tighten them to the specified torques. Tightening torques: Final gear oil level check bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) Final gear oil filler bolt: 23 Nm (2.3 m·kgf, 17 ft·lbf) To change the final gear oil 1. Place the ATV on a level surface. 2. Place an oil pan under the final gear case to collect the used oil. 8-27 1. Final gear oil 2. Final gear oil level check bolt 3. Correct oil level 3. If the oil is below the brim of the check hole, remove the final gear oil filler bolt, and then add sufficient oil of the recommended type to raise it to the correct level.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
2.
Remove the final gear oil level check bolt, and
then check the oil level in the final gear case.
NOTE:
The oil level should be at the brim of the check
hole.
1.
Final gear oil
2.
Final gear oil level check bolt
3. Correct oil level
3. If the oil is below the brim of the check hole,
remove the final gear oil filler bolt, and then
add sufficient oil of the recommended type to
raise it to the correct level.
1.
Final gear oil filler bolt
4.
Install the oil level check bolt and oil filler bolt,
and then tighten them to the specified torques.
Tightening torques:
Final gear oil level check bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Final gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
To change the final gear oil
1.
Place the ATV on a level surface.
2.
Place an oil pan under the final gear case to
collect the used oil.
8-27