2008 Yamaha Motorsports RS Vector GT Owners Manual - Page 15
2008 Yamaha Motorsports RS Vector GT Manual
Page 15 highlights
Control functions ESU10281 Main switch The main switch controls the ignition and lighting systems. The various positions are described below. 1. Starter (choke) lever NOTE: Refer to the "Starting the engine" section on page 28 for proper operation. 1. Off 2. On 3. Start Off The ignition circuit is switched off. The key can be removed only in this position. On The ignition circuit is switched on. Start The starting circuit is switched on. The starter motor cranks the engine. ECS00020 1. Warming up 2. When starting a cold engine. 3. When the engine is warm. ESU10310 CAUTION: Release the switch immediately after the engine starts. Throttle lever Once the engine is running cleanly, squeezing the throttle lever will increase the engine speed and cause engagement of the drive system. Regulate the speed of the snowmobile by varying the throttle position. Because the throttle is spring-loaded, the snowmobile will decelerate, and the engine will return to idle when it is released. NOTE: The headlights, meter lighting, and taillights come on after the engine is started. ESU10300 Starter (choke) lever Use the starter (choke) lever when starting and warming up a cold engine. 9