2008 Yamaha Motorsports V Star 1100 Silverado Owners Manual - Page 78
2008 Yamaha Motorsports V Star 1100 Silverado Manual
Page 78 highlights
PERIODIC MAINTENANCE AND MINOR REPAIR 8. Place the ignitor unit panel in the original position and install the quick fasteners. NOTE: To install a quick fastener, push its pin back so that it will protrude from the fastener head, then insert the fastener and push the protruding pin in until it is flush with the fastener head. EAU23792 Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. 1. Remove the headlight unit by removing the screws. 1. Headlight bulb holder EWA10790 WARNING Headlight bulbs get very hot. Therefore, keep flammable products away from a lit headlight bulb, and do not touch the bulb until it has cooled down. 4. Place a new headlight bulb into position, and then secure it with the bulb holder. ECA10660 6 1. Screw 1. Quick fastener (after removal) 2. Quick fastener (before installation) 9. Install the rider seat. 2. Disconnect the headlight coupler, and then remove the bulb cover. 3. Unhook the headlight bulb holder, and then remove the defective bulb. CAUTION: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely af- 6-33