2009 Yamaha Motorsports Grizzly 125 Automatic Owners Manual - Page 87

2009 Yamaha Motorsports Grizzly 125 Automatic Manual

Get 2009 Yamaha Motorsports Grizzly 125 Automatic PDF manuals and user guides View all 2009 Yamaha Motorsports Grizzly 125 Automatic manuals

Page 87 highlights

10. Turn the engine off, wait at least ten minutes, and then check the oil level and correct it if necessary. EBU27023 3 2 1 2 3 4 Transmission oil The transmission oil level should be checked before each ride. In addition, the transmission oil must be changed at the intervals specified in the periodic maintenance and lubrication chart. To check the transmission oil level 1. Place the ATV on a level surface. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Wait a few minutes until the oil settles, and then remove the screw located at the right side of the crankcase. 1 1. Screw 2. Transmission oil level check window 3. Correct oil level 5 6 7 8 9 10 11 4. Check the transmission oil level. TIP The transmission oil should be at the brim of the hole. 5. If the transmission oil level is below the brim of the hole, remove the oil filler bolt, add sufficient oil of the recommended type to raise it to the correct level, and then install and tighten the screw and the oil filler bolt. 8-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
8-13
1
2
3
4
5
6
7
8
9
10
11
10.
Turn the engine off, wait at least ten minutes,
and then check the oil level and correct it if
necessary.
EBU27023
Transmission oil
The transmission oil level should be checked be-
fore each ride. In addition, the transmission oil
must be changed at the intervals specified in the
periodic maintenance and lubrication chart.
To check the transmission oil level
1.
Place the ATV on a level surface.
2.
Start the engine, warm it up for several min-
utes, and then turn it off.
3.
Wait a few minutes until the oil settles, and
then remove the screw located at the right
side of the crankcase.
4.
Check the transmission oil level.
TIP
The transmission oil should be at the brim of the
hole.
5.
If the transmission oil level is below the brim of
the hole, remove the oil filler bolt, add suffi-
cient oil of the recommended type to raise it to
the correct level, and then install and tighten
the screw and the oil filler bolt.
1. Screw
2. Transmission oil level check window
3. Correct oil level
1
3
2