2009 Yamaha Motorsports Grizzly 350 Auto. 4x4 IRS Owners Manual - Page 109
2009 Yamaha Motorsports Grizzly 350 Auto. 4x4 IRS Manual
Page 109 highlights
ECB00420 EBU23422 NOTICE Be sure no foreign material enters the final gear case. 7. Install the oil filler bolt, and then tighten it to the specified torque. Tightening torque: Final gear oil filler bolt: 24 Nm (2.4 m·kgf, 17 ft·lbf) 8. Check the final gear case for oil leakage. If oil is leaking, check for the cause. 9. Install the engine guard and the final gear case guard by installing the bolts, and then tightening them to the specified torques. Tightening torques: Engine guard bolt: 7 Nm (0.7 m·kgf, 5.1 ft·lbf) Final gear case guard bolt: 7 Nm (0.7 m·kgf, 5.1 ft·lbf) Differential gear oil The differential gear case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the ATV. In addition, the differential gear oil level must be checked and the oil changed as follows at the intervals specified in the periodic maintenance and lubrication chart. To check the differential gear oil level 1. Place the ATV on a level surface. TIP The differential gear oil level must be checked on a cold engine. 2. Remove the differential gear oil filler bolt, and then check the oil level in the differential gear case. 8 8-19