2009 Yamaha Motorsports Phazer R-TX Owners Manual - Page 55
2009 Yamaha Motorsports Phazer R-TX Manual
Page 55 highlights
Periodic maintenance and adjustment ESU13001 Tool kit The service information included in this manual and the tools provided in the owner's tool kit are intended to assist you in the performance of preventive maintenance and minor repairs. However, additional tools such as a torque wrench may be necessary to perform certain maintenance work correctly. Shroud, front cover, and air filter case cover To open the shroud and remove the front cover and air filter case cover 1. Unhook the latch, and then slide the front cover upward (PZ50 / PZ50RT / PZ50GT / PZ50MT). Unhook the shroud latches, and then slowly raise the shroud forward until it stops (PZ50VT). 2. Loosen the fasteners, lift up the air filter case cover slightly, and then unhook the cover from the air filter case to remove it. PZ50 / PZ50RT / PZ50GT / PZ50MT 1. Tool kit ECS00780 NOTICE Before starting the engine, make sure that the tool kit is securely fastened (PZ50 / PZ50RT / PZ50GT / PZ50MT) and that the storage pouch zipper is completely closed. 1. 2. 3. 4. Latch Front cover Air filter case cover Fastener TIP If you do not have a torque wrench available during a service operation requiring one, take your snowmobile to a Yamaha dealer to check the torque settings and adjust them if necessary. ESU11763 PZ50VT Removing and installing the shroud and covers EWS00091 WARNING Be sure shroud and covers are secured before operation. A loose shroud or cover could move and cause loss of control. 1. Shroud latch 2. Shroud 49