2009 Yamaha Motorsports VMAX Owners Manual - Page 27
2009 Yamaha Motorsports VMAX Manual
Page 27 highlights
INSTRUMENT AND CONTROL FUNCTIONS TIP To perform further multi-function display settings, be sure the transmission is in neutral, then enter the Select mode again by pushing and holding "SELECT" and "RESET" for at least three seconds. Checking and resetting the system status The status/readings of the following items are displayed, and the tripmeters can be reset. ● tripmeters and odometer ● fuel consumption ● air intake temperature ● throttle opening position TIP ● mode is automatically displayed. 1. Push "SELECT" to highlight "System status", then push "RESET". TIP ● ● 2. Push "SELECT" to highlight "Yes", then push "RESET". (Highlighting "No" and pushing "RESET" returns to the previous menu.) ● Push "SELECT" for at least two seconds to switch between miles and kilometers. Pushing "RESET" displays the Normal mode for five seconds. Pushing "SELECT" and "RESET" for at least three seconds, changes the display to the Normal mode. To perform further multi-function display settings, enter the Select mode again by pushing and holding "SELECT" and "RESET" for at least three seconds. 2 3 4 5 6 7 The display changes to the status screen. ● The "System status" menu cannot be entered if the fuel level warning light or coolant temperature warning light is on. If, when the engine is running while the system status menu is displayed, the fuel level warning light or coolant temperature warning light comes on, the Normal Push "SELECT" and the various tripmeters and the odometer are displayed in the following order: (TRIP-F) → TRIP-1 → TRIP-2 → ODO → (TRIP-F) Push "RESET" to reset a tripmeter. 4-11 Resetting the maintenance counters This function allows you to reset the maintenance counters for the tires, the engine oil, and an item of your choice. 1. Push "SELECT" to highlight "Maintenance", then push "RESET". 8 9