2010 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 51

EBU19872 OPERATION EWB00011 WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. EBU19901 Read the Owner's Manual carefully before riding the ATV. If there is a control or function you do not understand, ask your Yamaha dealer. EWB00631 1. Turn the fuel cock to "ON". 2. Turn the key to "ON" and the engine stop switch to " ". 3. Shift the drive select lever into the neutral or park position. The corresponding indicator light should come on. If the indicator light does not come on, have a Yamaha dealer check the electrical circuit. TIP The engine can be started under the following conditions: G The drive select lever is in the neutral or park position. G The rear brake lever is applied with the drive select lever in any position. However, it is recommended to shift into the neutral or park position before starting the engine. 4. Use the starter (choke) in reference to the figure: Position (1): Cold engine start with ambient temperature below 5 °C (40 °F). 6-1 6 WARNING Read the Owner's Manual carefully to become familiar with all controls in order to help prevent any loss of control, which could cause an accident or injury. EBU20054 Starting a cold engine ECB00150 NOTICE See the "Engine break-in" section on page 6-5 prior to operating the engine for the first time.