2010 Yamaha Motorsports Phazer GT Owners Manual - Page 64
2010 Yamaha Motorsports Phazer GT Manual
Page 64 highlights
Periodic maintenance and adjustment 9. Install the right side cover (PZ50RT / PZ50GT / PZ50MT), or install the right side cover and the right upper cover, and then close the shroud (PZ50VT). To change the engine oil (without oil filter cartridge replacement) 1. Place the snowmobile on a level surface and apply the parking brake. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Remove the right side cover (PZ50RT / PZ50GT / PZ50MT), or open the shroud and remove the right upper cover and the right side cover (PZ50VT). (See page 48 for removal procedure.) 4. Remove the bottom panel and the right lower cover. 1. Oil level gauge coupler 2. Oil filler cap 7. Remove the oil filler cap and drain bolt to drain the oil from the oil tank. 1. Engine oil drain bolt (oil tank) 8. 1. Bottom panel 9. Place an oil pan under the engine to collect the used oil. Remove the engine oil drain bolt to drain the oil from the crankcase. 1. Right lower cover 5. 6. Place an oil pan under the oil tank to collect the used oil. Disconnect the oil level gauge coupler. 1. Engine oil drain bolt (crankcase) 58