2010 Yamaha Motorsports Phazer M-TX Owners Manual - Page 37
2010 Yamaha Motorsports Phazer M-TX Manual
Page 37 highlights
Control functions rection (b) more than 12 click(s). Even if the adjusting knob is continually turned after 12 click(s), there will be no change in the damping force. Be sure to stop the adjusting knob at a position where there is a click. [ECS00910] (b) 1 (a) 1. Compression damping force adjusting knob Compression damping force setting: Minimum (soft): 12 click(s) in direction (b)* Standard: 6 click(s) in direction (b)* Maximum (hard): 1 click(s) in direction (b)* * With the adjusting knob fully turned in direction (a) ESU11033 1. Locknut 2. Control rod adjusting nut 2. Adjusting the control rods (PZ50VT) EWS00770 WARNING The left and right adjusting nuts must be set to the same position. Uneven settings can cause poor handling and loss of stability. The weight transfer can be adjusted by turning the adjusting nuts on the control rods. 1. Loosen the locknut while holding the adjusting nut. To increase weight transfer, turn the adjusting nut in direction (a), and to decrease weight transfer, turn it in direction (b). WARNING! Never adjust the control rods beyond the maximum setting, indicated by red paint; otherwise, they could be damaged, which could lead to an accident or injury. [EWS00173] 31