2010 Yamaha Motorsports Phazer R-TX Owners Manual - Page 17
2010 Yamaha Motorsports Phazer R-TX Manual
Page 17 highlights
Control functions TIP If the T.O.R.S. is activated, the warning light and self-diagnosis warning indicator will flash, and the two-digit code "84" will flash in the meter display. If this occurs, have a Yamaha dealer check the system as soon as possible. When the key is turned to the on position, the warning light, the low coolant temperature indicator light, the knock control system "KCS" indicator light, the drive "D" and reverse "R" indicator lights, and all segments of the meter display come on and go off. The grip warmer level is initially displayed for 5 seconds, then the display switches to the fuel meter. 1 10 9 1. Warning light " " 2. Self-diagnosis warning indicator " 3. Two-digit code "84" ESU10394 2 3 4 8765 " 1. 2. 3. 4. 5. 6. 7. Speedometer unit The speedometer unit is equipped with the following: G a digital speedometer G an odometer G a tripmeter (which shows the distance traveled since it was last set to zero) G an engine speed meter (which shows the engine speed; not for use while riding) G warning indicators (which show self-diagnosis, coolant temperature, fuel level, and oil level warnings) G indicator lights (which show high beam, low coolant temperature, transmission position, and knock control system conditions) G a warning light (which shows warnings together with the warning indicators) G a fuel meter (which shows the fuel remaining in the fuel tank) G a grip/thumb warmer level indicator (which shows the grip warmer or the thumb warmer level) Meter display Drive "D" indicator light Reverse "R" indicator light Drive select switch Knock control system "KCS" indicator light High beam indicator light " " Low coolant temperature indicator light " " 8. Warning light " " 9. "RESET" button 10. "SELECT" button Odometer, tripmeter, and engine speed meter modes Pushing the "SELECT" button switches the display between the odometer mode "ODO", tripmeter mode "TRIP", and engine speed meter mode "r/min" in the following order: ODO → TRIP → r/min → ODO To reset the tripmeter, push the "RESET" button for at least 1 second while the tripmeter is displayed. 11