2010 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 83
2010 Yamaha Motorsports Road Star Silverado S Manual
Page 83 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. EAU24181 Tail/brake light This model is equipped with an LEDtype tail/brake light. If the tail/brake light does not come on, have a Yamaha dealer check it. 1. Headlight coupler 2. Headlight bulb cover 3. Unhook the headlight bulb holder, and then remove the burnt-out bulb. 7 1. Headlight bulb holder 4. Place a new headlight bulb into position, and then secure it with the bulb holder. 7-36
![](/manual_guide/autos/2010-yamaha-motorsports-road-star-silverado-s-owners-manual-0a53e91/83.png)
PERIODIC MAINTENANCE AND ADJUSTMENT
7-36
7
3.
Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
4.
Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
and then connect the coupler.
6.
Install the headlight unit by install-
ing the screws.
7.
Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24181
Tail/brake light
This model is equipped with an LED-
type tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
1.
Headlight coupler
2.
Headlight bulb cover
1.
Headlight bulb holder