2010 Yamaha Motorsports V Star 650 Custom Owners Manual - Page 27
2010 Yamaha Motorsports V Star 650 Custom Manual
Page 27 highlights
INSTRUMENT AND CONTROL FUNCTIONS EAU13620 EAU14184 Starter (choke) knob " " Seats (XVS65Z) Passenger seat To remove the passenger seat Remove the nut and washer, and then pull the passenger seat up. Tightening torque: Passenger seat nut: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) 4 1. Starter (choke) knob " " 1. Passenger seat holder 2. Projection Starting a cold engine requires a richer air-fuel mixture, which is supplied by the starter (choke). Move the knob in direction (a) to turn on the starter (choke). Move the knob in direction (b) to turn off the starter (choke). ECA10990 Rider seat 1. Nut 2. Washer NOTICE Do not use the starter (choke) for more than 3 minutes as the exhaust pipe may discolor from excessive heat. In addition, extended use of the starter (choke) will cause afterburning. If this occurs, turn off the starter (choke). To install the passenger seat 1. Insert the projection on the front of the passenger seat into the seat holder as shown and place the seat in the original position. 2. Install the washer and nut, and then tighten the nut to the specified torque. 4-10 To remove the rider seat 1. Remove the passenger seat. 2. Remove the passenger seat holder by removing its bolts, and then pull the rider seat up.