2010 Yamaha Motorsports V Star Custom Owners Manual - Page 53
2010 Yamaha Motorsports V Star Custom Manual
Page 53 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 9. Refill with the specified amount of the recommended oil, and then install and tighten the oil filler cap. Recommended engine oil: See page 9-1. Oil quantity: Without oil filter element replacement: 2.60 L (2.75 US qt, 2.29 Imp.qt) With oil filter element replacement: 2.80 L (2.96 US qt, 2.46 Imp.qt) 1. Outer oil filter element cover 2. Bolt 1. Oil filter element 2. O-ring 6. Install a new oil filter element and the O-ring. 7. Install the oil filter element covers by installing the bolts, and then tighten them to the specified torque. Tightening torque: Oil filter element cover bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 1. Inner oil filter element cover 2. Bolt TIP Be sure to wipe off spilled oil on any parts after the engine and exhaust system have cooled down. ECA11620 7 NOTICE 8. Install the engine oil drain bolt, and then tighten it to the specified torque. TIP Check the washer for damage and replace it if necessary. 7-12 G 5. Remove the oil filter element and O-ring. In order to prevent clutch slippage (since the engine oil also lubricates the clutch), do not mix any chemical additives. Do not use oils with a diesel specification of "CD" or oils of a high-