2010 Yamaha Motorsports Vino Classic Owners Manual - Page 59
2010 Yamaha Motorsports Vino Classic Manual
Page 59 highlights
Turn signal light bulb, replacing PERIODIC MAINTENANCE AND ADJUSTMENT 3. Remove the headlight bulb holder by turning it counterclockwise, and then remove the burnt-out bulb. EAU24133 EAU24204 EAU1722A Replacing the tail/brake light bulb 1. Remove the tail/brake light lens by removing the screws. Replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. 1 2 2 1 3 4 1 1 ZAUM00** 1. Headlight bulb holder ZAUM00** ZAUM00** 5 4. Place a new headlight bulb into position, and then secure it with the bulb holder. 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. 2 6 7 8 9 1. Tail/brake light lens 2. Bulb 1. Turn signal light lens 2. Bulb 2. Remove the burnt-out bulb by pushing it in and turning it counterclockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. 4. Install the lens by installing the screws. NOTICE: Do not overtighten the screws, otherwise the lens may break.[ECA10681] 6-59 6-23