2011 Yamaha Motorsports C3 Owners Manual - Page 59
2011 Yamaha Motorsports C3 Manual
Page 59 highlights
EAU1722A PERIODIC MAINTENANCE AND ADJUSTMENT EAU23783 Replacing the headlight bulb This model is equipped with a quartz bulb headlight. If the headlight bulb burns out, replace it as follows. ECA10650 1. Remove the headlight unit by removing the screws. 1 2(✕2) 3. Remove the headlight bulb holder by turning it counterclockwise, and then remove the burnt-out bulb. 1 2 3 NOTICE Take care not to damage the following parts: ● Headlight bulb Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. ● Headlight lens • Do not affix any type of tinted fi lm or stickers to the headlight lens. • Do not use a headlight bulb of a wattage higher than specified. 1 ZAUM00** 1. Headlight unit 2. Screw 4 ZAUM00** 2. Disconnect the headlight coupler, and then remove the bulb cover. 1. Headlight bulb holder 5 6 7 8 9 2 1 4. Place a new headlight bulb into position, and then secure it with the bulb holder. 5. Install the headlight bulb cover, and then connect the coupler. 6. Install the headlight unit by installing the screws. 7. Have a Yamaha dealer adjust the headlight beam if necessary. ZAUM00** 1. Headlight coupler 2. Bulb cover 6-24