2011 Yamaha Motorsports Grizzly 350 Owners Manual - Page 108
2011 Yamaha Motorsports Grizzly 350 Manual
Page 108 highlights
ECB00931 NOTICE To charge a VRLA (Valve Regulated Lead Acid) battery, a special (constant-voltage) battery charger is required. Using a conventional battery charger will damage the battery. To store the battery G If the ATV will not be used for more than one month, remove the battery, fully charge it, and then place it in a cool, dry place. G If the battery will be stored for more than two months, check it at least once a month and fully charge it if necessary. ECB00940 2. Connect the positive battery lead first, then connect the negative battery lead by installing their bolt.NOTICE: When installing the battery, the main switch must be off, and the positive lead must be connected before the negative lead. [ECB01110] 2 1 8 NOTICE Always keep the battery charged. Storing a discharged battery can cause permanent battery damage. To install the battery TIP Be sure the battery is fully charged. 1. Place the battery in its compartment. 8-38 1. Positive battery lead (red) 2. Negative battery lead (black) 3. Install the battery holding plate by installing the bolts. 4. Install the seat. (See page 4-11.)
![](/manual_guide/autos/2011-yamaha-motorsports-grizzly-350-owners-manual-030425a/108.png)