2011 Yamaha Motorsports Grizzly 450 4x4 Owners Manual - Page 136
2011 Yamaha Motorsports Grizzly 450 4x4 Manual
Page 136 highlights
4. Remove the burnt-out bulb by pulling it out. 5. Insert a new headlight bulb into the bulb holder by pushing it in. NOTICE: Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transparency of the glass, the luminosity of the bulb, and the bulb life will be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb using a cloth moistened with alcohol or thinner. [ECB00651] 7. Install the bulb holder cover and the cover at the rear of the headlight. NOTICE: Make sure the headlight bulb holder cover is securely fitted over the bulb holder and seated properly. [ECB00671] 8. Adjust the headlight beam if necessary. EBU25551 Adjusting a headlight beam ECB00690 NOTICE It is advisable to have a Yamaha dealer make this adjustment. To raise a headlight beam, turn the headlight beam adjusting screw in direction (a). To lower a headlight beam, turn the adjusting screw in direction (b). 8 1. Do not touch the glass part of the bulb. 6. Install the bulb holder by pushing it in and turning it clockwise. 8-56