2011 Yamaha Motorsports RS Viking Professional Owners Manual - Page 60
2011 Yamaha Motorsports RS Viking Professional Manual
Page 60 highlights
Periodic maintenance and adjustment 10. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Secondary sliding sheave 2. Secondary fixed sheave 11. Install the V-belt between the secondary sliding and fixed sheaves. 1. V-belt position adjusting bolt 2. Spacer V-belt position More than 1.5 mm (0.06 in) above the edge From 1.5 mm (0.06 in) above the edge to 0.5 mm (0.02 in) below the edge More than 0.5 mm (0.02 in) below the edge Adjustment Remove a spacer. 1. V-belt Not necessary (it is correct). 12. Install the drive guard and close the shroud. ESU12584 Add a spacer. Drive chain housing To check the drive chain housing oil level 1. Place the snowmobile on a level surface and apply the parking brake. 2. Remove the rubber cap. 8. Tighten the V-belt position adjusting bolts. V-belt position adjusting bolt tightening torque: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 9. Install the V-belt over the primary sheave assembly. 54