2011 Yamaha Motorsports Road Star Silverado S Owners Manual - Page 82
2011 Yamaha Motorsports Road Star Silverado S Manual
Page 82 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT 6. Install the license plate light unit by installing the bolts. EAU24350 Supporting the motorcycle Since this model is not equipped with a centerstand, follow these precautions when removing the front and rear wheel or performing other maintenance requiring the motorcycle to stand upright. Check that the motorcycle is in a stable and level position before starting any maintenance. A strong wooden box can be placed under the engine for added stability. To service the front wheel 1. Stabilize the rear of the motorcycle by using a motorcycle stand or, if an additional motorcycle stand is not available, by placing a jack under the frame in front of the rear wheel. 2. Raise the front wheel off the ground by using a motorcycle stand. To service the rear wheel Raise the rear wheel off the ground by using a motorcycle stand or, if a motorcycle stand is not available, by placing 1 1. License plate light bulb socket 3. Remove the burnt-out bulb by pulling it out. 7 1. License plate light bulb 4. Insert a new bulb into the socket. 5. Install the socket (together with the bulb) by pushing it in, and then turn it clockwise until it stops. 7-35
![](/manual_guide/autos/2011-yamaha-motorsports-road-star-silverado-s-owners-manual-97224d6/82.png)