2012 Yamaha Motorsports Grizzly 700 4x4 EPS SE Owners Manual - Page 118
2012 Yamaha Motorsports Grizzly 700 4x4 EPS SE Manual
Page 118 highlights
13. Pour the recommended coolant into the reservoir to the maximum level mark, and then install the reservoir cap. NOTICE: Mix antifreeze with distilled water only. However, if distilled water is not available, soft water may be used for refilling. Do not use hard water or salt water since they are harmful to the engine. [ECB00991] Antifreeze/water mixture ratio: 1:1 Recommended antifreeze: High-quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines Coolant quantity: Radiator capacity (including all routes): 1.99 L (2.10 US qt, 1.75 Imp.qt) Coolant reservoir capacity (up to the maximum level mark): 0.24 L (0.25 US qt, 0.21 Imp.qt) 14. Loosen the water pump air bleed bolt, without removing it, to allow all of the air to escape from the air bleed bolt hole. 1 1. Water pump air bleed bolt 8 15. When coolant begins to flow out of the bolt hole, tighten the water pump air bleed bolt to the specified torque. Tightening torque: Water pump air bleed bolt: 10 Nm (1.0 m·kgf, 7.2 ft·lbf) 16. Remove panel E. (See page 8-10.) 17. Loosen the clamp screw, and then remove the V-belt cooling duct. 8-36