2012 Yamaha Motorsports Majesty Owners Manual - Page 59

2012 Yamaha Motorsports Majesty Manual

Get 2012 Yamaha Motorsports Majesty PDF manuals and user guides View all 2012 Yamaha Motorsports Majesty manuals

Page 59 highlights

PERIODIC MAINTENANCE AND ADJUSTMENT Final transmission oil EAU20065 tire or wheel.[EWA11311] The final transmission case must be checked for oil leakage before each ride. If any leakage is found, have a Yamaha dealer check and repair the scooter. In addition, the final transmission oil must be changed as follows at the intervals specified in the periodic maintenance and lubrication chart. 1. Start the engine, warm up the final transmission oil by riding the scooter for several minutes, and then stop the engine. 2. Place the scooter on the centerstand. 3. Place an oil pan under the final transmission case to collect the used oil. 4. Remove the final transmission oil filler cap and its O-ring from the final transmission case. 5. Remove the final transmission oil drain bolt and its gasket to drain the oil from the final transmission case. 1 2 3 Recommended final transmission oil: See page 9-1. Oil quantity: 0.25 L (0.26 US qt, 0.22 Imp.qt) 2 3 4 5 6 7 8 9 4 1. Final transmission oil filler cap 2. O-ring 3. Gasket 4. Final transmission oil drain bolt 8. Install the final transmission oil filler cap and its new O-ring, and then tighten the oil filler cap. 9. Check the final transmission case for oil leakage. If oil is leaking, check for the cause. 6. Install the final transmission oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. Tightening torque: Final transmission oil drain bolt: 20 Nm (2.0 m·kgf, 14 ft·lbf) 7. Refill with the specified amount of the recommended final transmission oil. WARNING! Make sure that no foreign material enters the final transmission case. Make sure that no oil gets on the 7-18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
PERIODIC MAINTENANCE AND ADJUSTMENT
7-18
2
3
4
5
6
7
8
9
EAU20065
Final transmission oil
The final transmission case must be
checked for oil leakage before each
ride. If any leakage is found, have a
Yamaha dealer check and repair the
scooter. In addition, the final transmis-
sion oil must be changed as follows at
the intervals specified in the periodic
maintenance and lubrication chart.
1. Start the engine, warm up the final
transmission oil by riding the
scooter for several minutes, and
then stop the engine.
2. Place the scooter on the center-
stand.
3. Place an oil pan under the final
transmission case to collect the
used oil.
4. Remove the final transmission oil
filler cap and its O-ring from the fi-
nal transmission case.
5. Remove the final transmission oil
drain bolt and its gasket to drain
the oil from the final transmission
case.
6. Install the final transmission oil
drain bolt and its new gasket, and
then tighten the bolt to the speci-
fied torque.
7. Refill with the specified amount of
the recommended final transmis-
sion oil.
WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on the
tire or wheel.
[EWA11311]
8. Install the final transmission oil fill-
er cap and its new O-ring, and then
tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
1.
Final transmission oil filler cap
2. O-ring
3. Gasket
4.
Final transmission oil drain bolt
Tightening torque:
Final transmission oil drain bolt:
20 Nm (2.0 m·kgf, 14 ft·lbf)
2
1
4
3
Recommended final transmission
oil:
See page 9-1.
Oil quantity:
0.25 L (0.26 US qt, 0.22 Imp.qt)