2012 Yamaha Motorsports RS Venture Owners Manual - Page 98
2012 Yamaha Motorsports RS Venture Manual
Page 98 highlights
Periodic maintenance and adjustment RST90 Recommended drive chain oil: SAE 75W or 80W API GL-3 Gear oil 5. Install the dipstick, making sure to align the notch in the dipstick handle with the projection on the drive chain housing. 1. Dipstick 1 4. Remove the dipstick and check that the oil is between the maximum and minimum level marks on the "REVERSE" side of the dipstick. If the oil is below the minimum level mark, add sufficient oil of the recommended type to raise it to the maximum level mark. NOTICE: Make sure that no foreign material enters the drive chain housing. [ECS00531] 2 1. Notch 2. Projection 6. Install the right side cover and the shroud (RS90P / RS90PLT / RST90PGT), or close the shroud (RST90). Remove the shroud and the right side cover (RS90P / RS90PLT / RST90PGT), or open the shroud (RST90). [See page 63 (RS90P / RS90PLT / RST90PGT) or page 67 (RST90) for the procedures.] Loosen the locknut. Turn the chain tension adjusting bolt clockwise until it is finger tight, and then loosen it 1/4 turn. To adjust the chain tension 1. 2. 3. 1. Maximum level mark 2. Minimum level mark 92