2012 Yamaha Motorsports Rhino 700 FI Auto. 4x4 Sport Edition Owners Manual - Page 135
2012 Yamaha Motorsports Rhino 700 FI Auto. 4x4 Sport Edition Manual
Page 135 highlights
5B410016 Installation 1. Clean the surface of the spark plug gasket and its mating surface, and then wipe off any grime from the spark plug threads. 2. Install the spark plug and tighten it to the specified torque. If a torque wrench is not available when you are installing the spark plug, a good estimate of the correct torque is one-quarter to one-half turn past finger tight. Have the spark plug tightened to the specified torque as soon as possible. Tightening torque: Spark plug: 13 Nm (1.3 m·kgf, 9.4 ft·lbf) 3. Install the spark plug cap. 4. Reinstall the console. Cleaning the air filter element There is a check hose at the bottom of the air filter case and at the bottom of the air duct under the case. If dust or water collects in a check hose, empty the hose and clean the air filter element and air filter case. 1 1. Air filter case check hose 8-26