2012 Yamaha Motorsports Royal Star Venture S Owners Manual - Page 82
2012 Yamaha Motorsports Royal Star Venture S Manual
Page 82 highlights
PERIODIC MAINTENANCE AND ADJUSTMENT TIP Skip steps 5-7 if the oil filter cartridge is not being replaced. 5. Remove the oil filter cartridge with an oil filter wrench. 1. O-ring 1. Torque wrench 2. Oil filter wrench 1 1. Oil filter cartridge 2. Oil filter wrench 2 TIP Make sure that the O-ring is properly seated. 7. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. Tightening torque: Oil filter cartridge: 17 Nm (1.7 m·kgf, 12 ft·lbf) 8 TIP An oil filter wrench is available at a Yamaha dealer. 6. Apply a thin coat of clean engine oil to the O-ring of the new oil filter cartridge. 8. Install the engine oil drain bolt and its new gasket, and then tighten the bolt to the specified torque. Tightening torque: Engine oil drain bolt: 43 Nm (4.3 m·kgf, 31 ft·lbf) 9. Refill with the specified amount of the recommended engine oil, and then install and tighten the oil filler cap. 8-15