3Com 2924-PWR User Guide - Page 232
ipSetup, Default Configuration
UPC - 610839964734
View all 3Com 2924-PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
232 APPENDIX E: 3COM CLI REFERENCE GUIDE ipSetup The ipSetup command allows the user to define an IP address on the device either manually or via a DHCP server. Syntax ipSetup [dhcp| ip-address mask [default-gateway ip-address]] Parameters ■ dhcp - Specifies the IP address is acquired automatically from the Dynamic Host Configuration Protocol (DHCP) server. ■ ip-address mask- Specifies that the IP address and default gateway are configured manually by the user (Range: 0.0.0.0. 223.255.255.255). Default Configuration No default IP address is defined for interfaces. User Guidelines IP Addresses configured beyond the range of 224.0.0.0 are defined as multicast, experimental or broadcast addresses. If a default gateway is configured manually, the IP-address and mask are required to be on the same subnet as the gateway-address and mask. Example The following example displays an IP address configured manually: ipSetup 161.71.34.120 255.255.255.0 The following example displays an IP address obtained via a DHCP server: ipSetup DHCP